GE TQD22200 200A 2-Pole Circuit Breaker: What You Need to Know
If you're maintaining, replacing, or upgrading a GE Q-Line electrical distribution panel, chances are you've come across the GE TQD22200 — a 200 amp, 2-pole molded case circuit breaker built for reliable overcurrent protection in 240V systems. Here's a closer look at what it is, what it does, and when it's the right part for the job.
What Is the GE TQD22200?
The TQD22200 is part of General Electric's Q-Line TQD series of molded case circuit breakers. It's a bolt-on, thermal-magnetic breaker designed for panelboards, meter stack applications, and other GE distribution equipment that call for a 200A, 2-pole breaker rated at 240V.
Like other breakers in the Q-Line family, it comes with a non-interchangeable trip unit and load side lug terminals, and it carries a standard interrupting capacity rated at 40°C.
Key Specifications
| Spec | Detail |
|---|---|
| Manufacturer | General Electric (GE) |
| Series / Frame | Q-Line / TQD |
| Amperage | 200A |
| Poles | 2 |
| Voltage | 240V AC max |
| Interrupting Rating | 10 kA @ 240V |
| Protection Type | Thermal-Magnetic |
| Trip Function | Long-Time and Instantaneous (LI) |
| Mounting | Bolt-On |
| Phase | 1 |
| Weight | 2 lbs |
Thermal-Magnetic Protection, Explained
The TQD22200 uses thermal-magnetic trip technology, combining two response mechanisms in one unit:
- Long-time (thermal) protection responds to sustained overload conditions, tripping gradually as heat builds from excess current.
- Instantaneous (magnetic) protection reacts immediately to short-circuit-level surges, cutting power before damage or fire risk escalates.
Together, these functions make the breaker well-suited for everyday distribution circuits as well as higher-demand loads like HVAC equipment and motors.
Where It's Used
The TQD22200 is typically specified for:
- Panelboard replacement in compatible GE distribution equipment
- Meter stack applications
- Retrofit and modernization projects on older GE panels, including units from the 1990s and early 2000s
- Commercial, multifamily, and light industrial electrical upgrades
Because breaker compatibility always comes down to the specific panel, enclosure, and bus arrangement, it's worth double-checking the existing equipment documentation — catalog number, amperage, pole count, voltage, and interrupting rating — before ordering a replacement.
Why Electrical Professionals Choose the TQD22200
A few things make this breaker a dependable pick for qualified electricians:
- Genuine GE part with clearly documented electrical ratings, which simplifies matching it against existing equipment
- Bolt-on connection for a secure, vibration-resistant fit compared to clip-in alternatives
- Aluminum-rated lugs, useful on jobs where conductor type matters
- Consistent build quality, which matters when a breaker is going into a panel that needs to perform for years without nuisance tripping
Installation Reminder
As with any circuit breaker, installation should be performed by a qualified electrical professional in accordance with applicable local codes and GE's equipment documentation. Always verify:
- Equipment model and compatibility
- Amperage and pole count
- Voltage and interrupting rating
- Mounting arrangement
- Local code requirements
Final Thoughts
The GE TQD22200 is a straightforward, dependable choice when a project calls for a 200A, 2-pole, 240V thermal-magnetic breaker in the Q-Line TQD family. Whether you're replacing a discontinued original, modernizing a panel, or stocking up for common panel replacements, its clearly defined specs make it easy to confirm fit before you order.
Shop the GE TQD22200 and other Q-Line circuit breakers at Prime Electric Depot.